Belaying lead with the Grigri 101

Lost gear? Selling? Donating? Questions?

Moderators: chossmonkey, Dom, granite_grrl

Belaying lead with the Grigri 101

Postby Adam » Mon May 05, 2008 8:08 am

User avatar
Adam
 
Posts: 1105
Joined: Mon Apr 02, 2007 8:39 pm

Re: Belaying lead with the Grigri 101

Postby chossmonkey » Mon May 05, 2008 12:26 pm

They also show the technique that lets you feed out rope without having to take your hand off the brake side like they originally suggested.


The new technique is well worth learning. I think the only reason Petzl doesn't scrap the old way is cause it would be kinda like saying they told you how to do it incorrectly to start with.
If women ruled the world there would be no wars, just be a bunch of jealous countries not talking to each other.
User avatar
chossmonkey
 
Posts: 1243
Joined: Mon Nov 13, 2006 4:11 pm
Location: Running a muck.

Re: Belaying lead with the Grigri 101

Postby Fred » Tue May 06, 2008 7:10 pm

Great vid.

I've always struggled with belaying lead with a GriGri. I'll be the first to confess that I've probably done the unsafe way of feeding slack out more than once. Belaying with one of these is always easy once your climber is a ways off the deck and route is overhanging. You can essentially leave an extra arm reach of slack out. This prevents the climber from an unexpected tug and caming the device when the belayer doesn't anticipate the clip. Usually the problem I have when watching a climber close to the ground and I don't want to give them too much rope.

One question though. This seems to work well in theory especially with a new rope but... I'm wondering. How would the new technique fair with a big old fat rope? Seems like a big loop in the line.

Also, what is Petzl's new recommendation for rope diameters to use with GriGri's? You can't tell me that all those pro sport climbers are sending on 10.5mm ropes and we know for sure they are all using GriGri's.
I want to go to hell... there's probably lots of rock to climb there.
User avatar
Fred
Site Admin
 
Posts: 3140
Joined: Wed Oct 20, 2004 12:30 am
Location: Fredericton, NB

Re: Belaying lead with the Grigri 101

Postby Fred » Tue May 06, 2008 7:14 pm

Also, do they still recommend not to use it for trad lead belay and why? I never understood that one.
I want to go to hell... there's probably lots of rock to climb there.
User avatar
Fred
Site Admin
 
Posts: 3140
Joined: Wed Oct 20, 2004 12:30 am
Location: Fredericton, NB

Re: Belaying lead with the Grigri 101

Postby Murph » Tue May 06, 2008 10:00 pm

Fred wrote:Also, do they still recommend not to use it for trad lead belay and why? I never understood that one.


I think it has something to do with the amount of force the device will hold before rope slippage. I remember reading it somewhere, but I’m too lazy to go look it up. Grigri’s start to slip in the 4-5 Kn range, standard ACT’s slip at 3 Kn and a munter hitch can only hold around 2.5 Kn. So in a larger fall, a Grigri would put more force on gear…. That is my understanding of it anyways.
-"Why do this instead of a 5.13 sport climb?"
-"Cause this is way more bitch!n'"
Matt Segal, The sharp end
User avatar
Murph
 
Posts: 188
Joined: Mon Oct 02, 2006 9:46 pm

Re: Belaying lead with the Grigri 101

Postby chossmonkey » Wed May 07, 2008 6:34 am

Murph wrote:
Fred wrote:Also, do they still recommend not to use it for trad lead belay and why? I never understood that one.


I think it has something to do with the amount of force the device will hold before rope slippage. I remember reading it somewhere, but I’m too lazy to go look it up. Grigri’s start to slip in the 4-5 Kn range, standard ACT’s slip at 3 Kn and a munter hitch can only hold around 2.5 Kn. So in a larger fall, a Grigri would put more force on gear…. That is my understanding of it anyways.

That's pretty much it. I think the Grigri slips at a higher load though than 5kN. As long as your belayer isn't anchored it really shouldn't be much of an issue though since the belayer will be lifted off the ground in a hard fall.


Oddly they say it is okay to belay aid with the grigri.
If women ruled the world there would be no wars, just be a bunch of jealous countries not talking to each other.
User avatar
chossmonkey
 
Posts: 1243
Joined: Mon Nov 13, 2006 4:11 pm
Location: Running a muck.

Re: Belaying lead with the Grigri 101

Postby chossmonkey » Wed May 07, 2008 6:56 am

Fred wrote:One question though. This seems to work well in theory especially with a new rope but... I'm wondering. How would the new technique fair with a big old fat rope? Seems like a big loop in the line.

Also, what is Petzl's new recommendation for rope diameters to use with GriGri's? You can't tell me that all those pro sport climbers are sending on 10.5mm ropes and we know for sure they are all using GriGri's.



I think the new technique works okay with fat ropes. That said, we have two Grigris. One for thin ropes and one for fat ropes. The fat rope grigri is just an older one that has been worn quite a bit and it makes feeding the rope a lot easier. It won't work with ropes less than 10.5mm. Keeping the rope in a nice pile goes a long way to easy use as well. I find when you are pulling rope through, it works best if the rope is nearly at your feet and just to the right. The angle that the device is held and that the rope runs through it can make a huge difference in how it feeds. The main pile can be wherever, but keep pulling a small pile out near where you are standing at the time. I do this even if the whole rope is right at my feet, just to make sure there are no tangles. Anticipating the clips is important to. If the draws are already up it can help if the climber lets the belayer know when they are going to clip.


With a new unworn Grigri you can normally use 9.7mm ropes without problems. Always do the yank test to see if the rope is threaded right and if the grigri will lock up on the rope. If the rope catches it should be okay. In theory, even if the rope doesn't catch, the grigri should function as a normal device (likely with less friction) as long as you hold onto the rope. Keep an eye on the rope when the climber is hanging. If the rope is slowly sliding through the device you know that the rope is getting pretty close to being to thin.
If women ruled the world there would be no wars, just be a bunch of jealous countries not talking to each other.
User avatar
chossmonkey
 
Posts: 1243
Joined: Mon Nov 13, 2006 4:11 pm
Location: Running a muck.


Return to Gear

Who is online

Users browsing this forum: No registered users and 8 guests

cron